China Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan factory and suppliers | Zhonghan

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with Sds Hammer, Deep Hole Drilling Machine, Electric Hammer Tool, Now we have experienced manufacturing facilities with extra than 100 employees. So we could guarantee short lead time and high quality assurance.
Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan Detail:

Parameter

Advantages

The pre-operation inspection should meet the following requirements:
1. No cracks or damage on the shell and handle;
2. The cable cord and plug are intact, the switch operates normally, and the protection zero connection is correct, firm and reliable;
3. The protective cover of each part is complete and firm, and the electrical protection device is reliable.

_DSC8026
_DSC8028
_DSC8029

Second, after the machine tool is started, it should be run without load, and the machine tool linkage should be checked and confirmed to be flexible and unimpeded.  During operation, the afterburner should be stable, and no excessive force should be applied.

3. The electric drill or hammer handle should be mastered during the operation, and the drill bit should be pressed against the work surface of the special-shaped rivet before drilling, and then it should be driven with moderate force to avoid shaking; if the speed drops sharply, the force should be reduced to prevent the motor from being overloaded.  Carry pressure.

Fourth, when drilling, you should pay attention to avoid the reinforcement in the concrete.
Fifth, the electric drill and the electric hammer are 40% intermittent working system, and may not be used continuously for a long time.
Sixth, when the operating aperture is more than 25mm, there should be a stable operating platform, and guardrails should be set around.

Seven, overloading is strictly prohibited. Attention should be paid to the sound and temperature rise during the operation. If any abnormality is found, the machine should be shut down and checked immediately. When the operation time is too long, and the temperature rise of the machine exceeds 60°C, the machine should be stopped, and the operation should be carried out after natural cooling.
8. When the machine rotates, don't let go.
9. During operation, do not touch the electric saw blade, die and grinding wheel with your hands. If it is found to be blunt or damaged, you should immediately stop the machine for repair or replacement, and then continue the operation.

Application scenarios of electric hammer

Widely used in construction, decoration and other industries, suitable for concrete,Brick wall, stone, etc
Electric drill function–With impact (mechanical CAM principle)
Suitable for concrete, brick wall, stone impact drilling and wood, metal,Ceramic tile drilling operation


dav

Electric hammer comparison:

500W input powerful

Dont let bad product drag

wall in weak    Motor not durable  The oil is easy to leak .

Our products will solve this all problems

Plastic Blowing Box

Company Profile


Product detail pictures:

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures

Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan detail pictures


Related Product Guide:

Our personnel are always in the spirit of "continuous improvement and excellence", and together with the top-quality good quality solutions, favorable selling price and superior after-sales providers, we try to acquire each customer's rely on for Factory wholesale Electric Hammer - Electric Hammer Drill 28mm Zh2-28 – Zhonghan , The product will supply to all over the world, such as: Slovakia, Curacao, Washington, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
  • This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
    5 Stars By Eileen from Romania - 2018.09.29 17:23
    We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Mamie from Finland - 2017.12.02 14:11
    Write your message here and send it to us